🔍

Kolink Modular Power 80 PLUS Bronze BLACK – 500 Watt

L7900

  • Maße: 150 x 86 x 160 mm (B x H x T)
  • Fan: 120 mm (automatic control)
  • Efficiency: at least 85/82/82 percent at 50/20/100 percent load, 80 PLUS Bronze certified
  • Active PFC
  • Form factor: ATX12V 2.3
  • Leistung: 500 W
    +3,3V: 15 A
    +5V: 15 A
    3,3V+5V: 100 W
    +12V: 444 W / 37 A
    -12V: 0,3 A (3 W)
    +5Vsb: 2,5 A (12,5 W)
  • Connectors (partially modular):
    1x 20+4-pin (500 mm, fixed)
    1x 4+4-pin (600 mm, fixed)
    1×2 6+2-pin PCIe (600 + 100 mm, modular)
    1×4 SATA (500 + 100 + 100 + 100 mm, modular)
    1×2 4-pin Molex (500 + 100 mm, modular)
  • Protection circuits:
    OVP/UVP (protection against over- and undervoltage)
    SCP (short circuit)
    OPP (overload)
    OCP (overcurrent on the rails +12, +3.3 and +5 volts)
  • MTBF: 100,000 hours
Category:

Description

The power supplies in the Modular Power series from Kolink shine with an improved circuit design and the associated increase in performance. The adjustments offer a significant improvement in voltage regulation and are ideal for modern, powerful computers. Added to this is the whisper-quiet 120 mm fan with a gentle and precise rotation curve and the optimized airflow, which make the power supply one of the quietest of its kind. With the modern design of the flexible, flat and partially modular cables for the numerous connections, the Modular Power power supplies cut a fine figure in any high-end gaming system.

The Kolink Modular Power 500W power supply at a glance:

  • 444 watts and 37 amps on the 12-volt rail
  • 80 PLUS Bronze certificate for high efficiency
  • ATX form factor with a length of 160 millimeters
  • Partially modular, modern look with flat black cables
  • Anschlüsse: 1x 24-Pin, 1x 4+4-Pin, 2x 6+2-Pin, 4x SATA, 2x Molex

Kolink Modular Power: Powerful performance with high efficiency

The 500-watt model of the Modular Power series offered here has sufficient connections and power for fast gaming computers with basic equipment. The electronics deliver up to 444 watts and 37 amps on the +12 volt line , and a further 100 watts and 15 amps each are provided on the +3.3 and +5 volt rails . The particularly high efficiency meets the requirements of 80 Plus Bronze 230V EU and thus exceeds 85/82/82 percent at 50/20/100 percent load (at 230 volt input voltage). The highly efficient circuit design has independent DC-to-DC converters for the 3.3 and 5 volt outputs, which ensures extremely precise voltage regulation. The power supplies of the Modular Power series

are cooled by 120 fans with long-lasting and quiet sleeve bearings that offer a precise rotation curve. Thanks to the optimized airflow, the fans and thus the entire power supply remain whisper quiet. In addition to the 20+4 pin for the mainboard, the Kolink Modular Power has a 4+4 pin connector for the power supply of the processor and two 6+2 pin connectors for dedicated graphics cards . Four SATA and two Molex connectors are available for the other components . The flat, flexible and completely black partially modular cables have a modern look and fit visually into almost any gaming setup. Note:

For the benefit of the environment, the manufacturer does not include a power cable for the mains connection.

Related products