Showing all 35 results

Antec NX Series NX210, Mid-Tower

L70

Case Specification
Dimensions 395 x 210 x 445 mm (DWH)
Form Factor Mid Tower
Materials SPCC + Plastic
Mainboard Support ATX, Micro-ATX, ITX
Front Access & Controls Power, Reset, LED Control Button, MIC/Audio, USB2.0 x 2, USB3.0 x 1
Side Panel Tempered Glass
Expansion & Drive Bays
5.25″ 0
3.5″ 1
2.5″ 3
Fan Support
Front 3 x 120mm
Rear 1 x 120mm
Included Fan(s) 4 x 120mm ARGB fans
(Default Lighting Effect, 3 in front & 1 in rear)
Radiator Support
Front ≤ 240mm
Rear ≤ 120mm
Clearance
Max GPU Length ≤ 310
Max CPU Height ≤ 155
PSU Support ≤ 220
Miscellaneous
Dust Filter Top
UPC# 0-761345-81020-3
Net Weight 4.8 kgs
Gross Weight 5.6 kgs

AUX Jack 3.5mm Audio Cable Nylon Braid 3.5mm Car AUX Cable 1.5M for Phone MP3 Car Headset Speaker – CMIMI 200 LEKE

L2

1.100% Brand New

2.Color:Gold, Silver,Black;Rose gold; Blue

3.Size: Length About 1.5M, Connector Diameter 3.5mm

4.Connectors: 3.5mm Plug Male to Male Aux Cable

5.Stereo Audio Aux Jack Cable

6.Good Stretch, Hard to Breaking

7.Elastic Nylon Braid Cable, Avoid Wrapped / Knotte

8.Computer Smartphone Vehicular Audio Transmissio

9.High Fidelity Transmission Perfect Sound Effec

10.High Quality aux cable

BARCODE READER Zonerich ZQ-LS6025 – CMIMI 3900 LEKE

L32

SPECIFICATION

1.       Barcode type: EAN8, EAN13, Code128, Code39, Code93, Codebar125

2.       Scan speed:120reads/sec

3.       Reading accuracy:0.10-0.852mm

4.       Reading distance:10-520mm

 

FEATURES

1.         1D handheld laser scanner

2.         Wider width of field than a typical CCD

3.         Ultra low error rate at 1/5,000,000

4.         Small size with manual and automatic scanning mode

5.         Three popular data ports : RS232, PS2, USB

BIG FAN 3 Pack Set RGB LED 120mm Case Fan with Controller

L2900

Specifications:

  • 3 xRGB LED case fan
  • 1 x RGB Controller
  • 1x Remote control board
  • 24 x rubber pad
  • 12 x Installing Screws
  • Speed:1100rpm±10
  • Noise Level:17.6 DBA
  • Input Power: 6.36W
  • Rated Voltage: DC12V
  • Input Current: 0.28A
  • Life Time: 40000Hrs
  • Fan interface:3pin- 4pin
  • Size:120mm(W)*120mm(D)*25mm(H)

DC3.5 Male/female Headphone 1/2 Audio Cable Headphone Extension – CMIMI 300 LEKE

L3

Product details of Gold-plated DC3.5 Male/female Headphone 1/2 Audio Cable Plug Cable Headphone Extension Cable Black/white

  • 1:Pure copper wire core, gold-plated connector, exquisite and fine product manufacturing2:High Quality Audio Enjoyment, Low Price Product Consumption3:one audio 3.5 male head out of two 3.5 female stereo female seat, two 3.5 female seats which can be connected to two external mp3 headphones Music or an external 2 audio playback device to play audio signals.
Sale!

DETEKTOR I PARAVE TE FALSIFIKUARA – COUNTERFEIT MONEY CURRENCY DETECTOR – AD-2138

L1500

Crony AD-2138 Detektor i parave të falsifikuara Verifikuesit e kartëmonedhave.

Modeli: AD-2138
Teknologjia e zbulimit: Drita UV, magnetike-Zbulim, zmadhues
Furnizimi me energji elektrike: AC 220 V
Konsumi i energjisë: <10 W
Ndërfaqja: NIL
Madhësia e produktit: 190x130x140 mm
Pesha: 550g
Karakteristikat shtesë: Zmadhues i integruar
Zbulimi i filigranëve
Ndezja/Fikja automatike e kursimit të energjisë
Kompakt dhe i lëvizshëm

External USB 2.0 CD/DVD-RW(Read-Write) Drive for Laptop, Desktop – CMIMI 3500 LEKE

Product : USB 2.0 DVD Writer

Package included:

1 x DVD/CD Player

1 x USB Data Cable

1 x USB Power Cable

1 x User Manual


Specifications :

  • Type: CD-RW/DVD-RW Burner/Writer/Drive.
  • USB Interface: USB 2.0(Backwards Compatible with USB2.0/1.0).
  • USB External DVD/CD-RW is a perfect companion for computers without internal drive. With this CD/DVD burner, you can watch DVD movies, burn files, movies to a CD/DVD, install software and create backup discs etc.
  • No extra drive, support plug and play.
  • Maximum data transfer rate up to 480 Mbps.
  • Just plug in computer, it will be recognized automatically within seconds, then you can press pop-up button, put in disc and enjoy movies, music, burn discs or install software/system, etc.
  • Speed is also decided by computer and system environment.

Hard Drive Caddy for 12.7mm Universal DVD HDD/SSD

L10
Support: SATA
Universal for 12.7mm hard disk, 2.5″ SATA to SATA
Compatible Models: Laptop with a 12.7mm thick DVD-ROM
Size: 125mm*125mm*12.7mm
Interface:SATA(ODD)-SATA(HDD)
Color: black
Connected notebook /computer interface: SATA
Size:127*126*12.7mm
Material: Magnesium
Support hard disk: 2.5 HDD, SATA, SATAII SDD
Brand new
Plug & Play, Fully integrated into Laptop, no cables needed
Package include:
1pc x hard drive (with screws)
1pc x screwdrivers

Hard Drive Caddy for 9.5mm Universal DVD HDD/SSD

L10
Support: SATA
Universal for 9.5mm hard disk, 2.5″ SATA to SATA
Compatible Models: Laptop with a 9.5mm thick DVD-ROM
Size: 125mm*125mm*9.5mm
Interface:SATA(ODD)-SATA(HDD)
Color: black
Connected notebook /computer interface: SATA
Size:127*126*9.5mm
Material: Magnesium
Support hard disk: 2.5 HDD, SATA, SATAII SDD
Brand new
Plug & Play, Fully integrated into Laptop, no cables needed
Package include:
1pc x hard drive (with screws)
1pc x screwdrivers

KOLINK BASTION BLACK

L75

The Kolink Bastion: A Spacious Case for Gaming Hardware

Even if the outer dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit and the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard.

Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is additionally equipped with front- and rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans.

Tempered Glass and RGB-LEDs to Set your Hardware Apart!

Even the motherboard tray is an eye-catcher in this case. Instead of boring squares and rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs and cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync.

The pre-installed fan’s lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips and fans can be connected to a corresponding 3-pin connector on the motherboard and controlled via its on-board software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/Reset switch, there are one USB 3.0 and two USB 2.0 connections as well as a 3.5 millimetre jack for headphones and microphones, alongside a power LED and an

KOLINK INSPIRE K1

L60

The Features of the Kolink Inspire K1 RGB at a Glance

–  Designer case compatible with motherboards up to ATX

–  Acrylic glass side panel and tempered glass front

–  2x Pre-installed 120 mm RGB-LED fans, 1x 80 mm fan on the back

–  I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out

–  Supports one 240 mm format radiator

–  3x 3.5 and 2x 2.5″ drive slots

–  Fits graphics cards up to 35 cm in length & CPU coolers up to 15 cm high

–  Includes fan controller and remote controller

–  Tempered Glass Front & Three Pre-Installed Fans

The robust chassis consists of millimetre thick SECC steel and is equipped with a lightweight acrylic side panel. The power supply is installed in the upper rear of section of the case, while there is space in the front – beneath the HDD cage – for up to two hard drives. A further HDD can be attached to the rear of the motherboard tray. Alternatively, users can put two 2.5″ SDDs there instead. Plenty of space is reserved for cable management.

In order to keep your hardware cooler, two 120 mm fans with Rainbow RGB-LED lighting are installed in the front. A pre-installed 80 mm fan is located at the back to help exhaust warm air away from the spacious case. Both front-facing fans are connected to the bundled controller via their 6-pin connector. Also included, a remote control enables users to select from up to 350 different effects. In total the controller can support six further fans and two RGB-LED strips which are obviously available separately. As for those who prefer to watercool their hardware on the other hand, a 240 mm radiator can be installed up front.

GPUs may be up to 35 cm long and CPU coolers up to 15 cm in height. Moreover, the I/O panel located at the front also includes a USB 3.0 Type A port in addition to two USB 2.0 ports.

KOLINK OBSERVATORY WHITE

L89

The Features of the Kolink Observatory at a Glance

–  Case designed to support motherboards up to
E-ATX

–  Front and side panel in 4 mm thick tempered glass

–  4x 120 mm RGB fans including controller and remote

–  I/O Panel with 2x USB 2.0 / 1x USB 3.0 &amp; HD Audio In/Out

–  Support for two radiators in 280 mm format

–  2x 3,5″ and 4x 2,5″ data storage devices

–  Supports graphics cards up to 38 cm long &amp; CPU coolers up to 16 cm high

–  Front and Side Panel in Tempered Glass
–  Four Pre-Installed RGB Fans

The robust chassis is made from millimetre thick SECC steel and comes with a front and side panel in four millimetre thick glass. The entire interior is likewise coated in white and equipped with a shroud for the power supply in order to maintain an incredibly clean aesthetic. A hard drive cage is attached here with brackets for two 3,5″ drives as well as space for the power supply. Four more 2,5″ drives can be placed next to the motherboard.  The visual highlight of the case is formed by the three 120 mm RGB fans pre-installed in the front and an additional fan in the rear. The fans possess 16 individually addressable RGB-LEDs. Their lighting can be controlled via infrared remote control using the bundled RGB controller and fan hub that can be placed in a location of your choosing. This enables 300 dynamic lighting effects to be configured. Two further 120 mm or 140 mm fans can be mounted in the roof. The three 120 mm fans at the front can be exchanged for two 140 mm fans.

Dust Filters Keep the Kolink Observatory Clean

The motherboard tray and the PSU shroud offer multiple openings for cables. A 240 mm radiator can be installed in the front and on the roof of the Kolink case. With air inlets are equipped with fine dust filters located in the roof and on the bottom of the case. They are easily removed without requiring tools and strengthened with a filigree honeycomb design.  GPUs can be up to 38 cm long and CPU coolers may be up to 16 cm high. Additionally the I/O panel located on the front offers two USB 2.0 connections as well as a USB 3.0 Type-A port. A cut-out is present for a USB Type-C connection, however this does not come as standard with the case and must be added later. The same is true of a switch used for controlling the I/O panel’s RGB lighting.

KOLINK Void RGB Midi Tower – black Window

L7500
  • Stylish midi tower for motherboards up to ATX
  • Distinctive front with infinity mirror effect and RGB lighting
  • 1x 120mm digital addressable RGB LED fan pre-installed
  • Radiators up to 240 mm
  • 2x 3.5/2.5″ & 2x 2.5″ slots
  • Removable dust filters on the lid and base

Trust Chair GXT701, Gaming, RYON, Black – Cmimi 18500 Leke

Karrigia e lojërave Trust shquhet për ndërtimin e saj të fortë
Karrigia e lojërave Trust GXT 701 Ryon Chair Black është e pajisur me një kornizë të fortë me një kapacitet ngarkese prej 150 kg, e cila siguron stabilitet maksimal gjatë uljes. Rrotullat shumë të qëndrueshme me rrotullim të qetë lejojnë lëvizje të shpejtë nëpër dhomë. Falë teknologjisë së ngritjes së gazit të klasës 4, është e mundur të rregulloni lehtësisht lartësinë e sediljes së karriges së lojërave duke përdorur një levë.

VESHJE FTOHESE PER RAM LED – CMIMI 1800 LEKE

L15

🛒 VESHJE FTOHESE RAMI ME DRITA LED
 RGB 250 COLORE TE NDRYSHUSHME
 ALUMIN DHE SILIKON FTOHES PER PC GAMING
QE TE PUNOJ 24 ORE PA PATUR PROBLEME ME MBINXEHJEN

Specification:
– Model: NC-1
– Colour: Black
– Dimension: 141MM (W) * 8.5MM (D) * 43MM(H)
– Material: Aluminum and ABS
– Connector: 1*3PIN
– Voltage: DC 12V
– Weight: Net 57g

Scope of delivery:
– 1x RAM cooler
– 2x thermal pads
– Mounting material

VGA Male to HDMI Video Converter Cable Output 1080P HD+ Audio TV AV HDTV Video – CMIMI 1200 LEKE

Specification:
* Device Type: VGA To HDMI Converter Adapter
* Input: VGA (DB15 Male)and Audio(3.5mm Audio Jack)
* Output: HDMI(Type A 19pin Female)
* VGA Resolution: 480i/576i/480p/576p/720p/1080i/1080p
* HDMI Resolution: 480i/576i/480p/576p/720p/1080i/1080p
* Using environment: -20-65 Degrees Celsius
* Relative humidity: 5%-95%
* Voltage: 5V 1A
* Support System: Windows 2000/XP/win7/win8/win10, Mac OS X and so on
* Length: Approx. 75cm USB cable; Approx. 45cm audio cable
* Dimension: 55x38x13mm
* Color: Black

Package includes:
1 x VGA To HDMI Converter Adapter
1 x USB Cable