Description
Product information – Observatory MX Glass ARGB Midi Tower – black
- Midi tower with an extraordinary design in black
- With half, hinged tempered glass pane
- Glass front panel and mesh PSU cover
- Support for ATX motherboards and GPUs up to 330mm long
- Five pre-installed Kolink Umbra ARGB fans
- Four drive bays
The Kolink Observatory MX Glass ARGB Midi Tower Midi tower for sophisticated gaming setups
Give your gaming PC a bold design with the Kolink Observatory Midi Tower from the MX series . The custom color scheme, half hinged tempered glass side panel and tempered glass on the front provide a strong aesthetic for any gaming PC. The five pre-installed Kolink Umbra ARGB fans and the mesh on the power supply cover ensure sufficient airflow to keep your components at optimal temperatures.
Choose between aesthetics or airflow
The Kolink Observatory MX series consists of two models, each available in three color versions. You can choose between the glass and mesh versions as well as the colors black, white or black and white.
This is the Glass model in black. The front panel is made of tempered glass, with subtle side mesh vents. To ensure that this case has adequate air circulation, the PSU cover has a mesh panel. As a black model, the exterior, interior and trim are all in black, with a double-toned material surface providing a special effect.
Generous hardware support
The Kolink Observatory MX Glass not only looks good, but also offers incredible support for a wide range of hardware. This case can accommodate a Mini-ITX, Micro-ATX or ATX motherboard and has seven expansion slots on the back for PCIe devices. There is 330 mm of space for graphics cards in the main chamber.
The dedicated PSU cover can accommodate power supplies up to 180mm. There is also a four-bay drive cage. Two of them can hold either 2.5-inch SSDs or 3.5-inch HDDs, while the other two are only suitable for 2.5-inch drives.
Lots of airflow ex works
To keep your gaming PC at optimal temperature, the Kolink Observatory MX Glass can support both air and water cooling. Five Kolink Umbra ARGB fans are pre-installed in the case to support airflow through the many meshes. There are two 140mm fans on the front. There are two 120mm fans on the top and a single 120mm fan is also installed on the back.
Alternatively, there is support for radiators and additional fans throughout the case. A maximum of two 140mm fans or a 240mm, 280mm or 360mm radiator can be attached to the front. At the back, the 120mm fan bracket can accommodate a 120mm radiator instead. The top can only accommodate the two 120mm fans, but there are also two 120mm brackets on the PSU cover to cool the second chamber.
Finally, the Kolink Observatory MX Glass offers space for CPU coolers with a height of up to 160 mm.
Additional features
The Kolink Observatory MX Glass features a USB 3.0 and a USB 2.0 port as part of the I/O panel, as well as an HD audio jack. There is also a reset button that can be used to control the fans. Alternatively, these can also be connected to the mainboard via a 3-pin 5V header and controlled via daisy chaining via the first fan.
Technical details:
- Dimensions: 200 x 440 x 350 mm (W x H x D)
- Material: steel, tempered glass
- Weight: approx. 5.6 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
Front: 2x 120 / 140 mm
Cover: 2x 120 mm
Back: 1x 120 mm
Power supply cover: 2x 120 mm - Of which pre-installed:
Front: 2x 140 mm
Lid: 2x 120 mm
Back: 1x 120 mm - Radiator mountings:
Front: 240 / 280 / 360 mm
Rear: 1x max. 120 mm - Drive bays:
2x 3.5 inch / 2.5 inch (HDD cage)
2x 2.5 inch (HDD cage) - Expansion slots: 7
- I/O panel:
2x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
1x USB 2.0 (Type A, max. 480 Mbit/s)
1x 3.5 mm jack (4-pin, TRRS, for microphone/headphones)
1x power button
1x reset button / fan control - Maximum graphics card length:
330 mm (with fans installed) - Maximum CPU cooler height: 160mm
- Power supply: max. 180 mm length
