Showing all 19 results
KOLINK VOID ( GERMAN BRAND )
RYZEN 5 5600 SIX XORE 6X 3.5 GHz 12CPUS
Asrock AM4 A520M-HDV uATX
RAM Crucial DDR4-3200 16GB ME FTOHJE RGB DRITA LED
SSD Crucial BX500 500GB Sata-3
HDD 1 TB ARKIV LOJRASH
ASRock Phantom Gaming D Radeon RX 6500 XT 4GB OC DEDIKUAR
COOLER PROCESORI CR1200 RGB DRITA LED
BLLOK USHQIMI KOLINK 500 W RGB LED
KOLINK Observatory
CORE I 7 8700 6X 3.2 GB SIC CORE
RAM 16 GB DDR4 ME FTOHJE RGB DRITA LED
SSD 512 GB
HDD 1 TB ARKIV
GRAFIKA RADEON RX6500 XT 4 GB DEDIKUAR
BLLOK KOLINK 500W ME DRITA LED
1 FTOHES RAMI AGB
1 FTOHES PROCESORI RGB
5 FTOHES KASE RGB
PRODUKTI ESHTE 100% SI NE FOTO
KOLINK Observatory
CORE I 5 8400 6X 2.8 GB SIC CORE
RAM 16 GB DDR4 ME FTOHJE RGB
SSD 256 GB
HDD 1 TB ARKIV
GRAFIKA NITRO+ RX580 8 GB DEDIKUAR
BLLOK KOLINK 700W
2FTOHES RAMI AGB
1FTOHES PROCESORI RGB
6FTOHES KASE RGB
PRODUKTI ESHTE 100% SI NE FOTO
Technical details
Dimensions:
140 x 86 x 150 mm (W x H x D)
Fan:
120 mm (automatic control)
Efficiency:
at least 80 percent at 50/20/100 percent load, 80 Plus certified
Active PFC (0.9)
Form Factor:
ATX12V 2.3
Rated power:
600 W (700 W) + 3.3V: 18A + 5V: 15A + 3.3V / + 5V: 100W + 12V: 576 W / 48 A -12V: 0.5A / 6W + 5Vsb: 2.5 A / 12.5 W
Connections (fixed):
1x 20 + 4-pin
1x 4 + 4-pin (CPU / ATX12V / EPS12V)
4x 6 + 2-pin PCIe card 5x SATA
3x 4-pole Molex
Technical details
Dimensions:
140 x 86 x 150 mm (W x H x D)
Fan: 120 mm (automatic control)
Efficiency: at least 80 percent at 50/20/100 percent load, 80 Plus certified
Active PFC (0.9)
Form Factor: ATX12V 2.3
Rated power:
600 W (max. 700 W) + 3.3V: 18A + 5V: 15A + 3.3V / + 5V: 100W + 12V: 576 W / 48 A -12V: 0.5A / 6W + 5Vsb: 2.5 A / 12.5 W
Connections (fixed):
1x 20 + 4-pin
1x 4 + 4-pin (CPU / ATX12V / EPS12V)
4x 6 + 2-pin PCIe card 5x SATA
3x 4-pole Molex
The high-quality power supplies of the Core series from Kolink are getting a visual update: Equipped with a side panel with digitally addressable RGB LEDs including a variety of effects, the power supplies contribute to a memorable gaming setup.
The Kolink Void Rift is the next addition to the Kolink Void range. Its main feature is the impressive infinity mirror that adorns the entire front and provides a stunning aesthetic. The rectangular design is illuminated by LED strips that can be customized with a variety of ARGB effects if desired. In addition, this exceptional case has excellent hardware support and extensive cooling options . The Void Rift is a particularly well-thought-out case for gamers and hardware enthusiasts.
The Kolink Bastion: A Spacious Case for Gaming Hardware
Even if the outer dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit and the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard.
Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is additionally equipped with front- and rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans.
Tempered Glass and RGB-LEDs to Set your Hardware Apart!
Even the motherboard tray is an eye-catcher in this case. Instead of boring squares and rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs and cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync.
The pre-installed fan’s lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips and fans can be connected to a corresponding 3-pin connector on the motherboard and controlled via its on-board software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/Reset switch, there are one USB 3.0 and two USB 2.0 connections as well as a 3.5 millimetre jack for headphones and microphones, alongside a power LED and an
The Features of the Kolink Inspire K1 RGB at a Glance
– Designer case compatible with motherboards up to ATX
– Acrylic glass side panel and tempered glass front
– 2x Pre-installed 120 mm RGB-LED fans, 1x 80 mm fan on the back
– I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out
– Supports one 240 mm format radiator
– 3x 3.5 and 2x 2.5″ drive slots
– Fits graphics cards up to 35 cm in length & CPU coolers up to 15 cm high
– Includes fan controller and remote controller
– Tempered Glass Front & Three Pre-Installed Fans
The robust chassis consists of millimetre thick SECC steel and is equipped with a lightweight acrylic side panel. The power supply is installed in the upper rear of section of the case, while there is space in the front – beneath the HDD cage – for up to two hard drives. A further HDD can be attached to the rear of the motherboard tray. Alternatively, users can put two 2.5″ SDDs there instead. Plenty of space is reserved for cable management.
In order to keep your hardware cooler, two 120 mm fans with Rainbow RGB-LED lighting are installed in the front. A pre-installed 80 mm fan is located at the back to help exhaust warm air away from the spacious case. Both front-facing fans are connected to the bundled controller via their 6-pin connector. Also included, a remote control enables users to select from up to 350 different effects. In total the controller can support six further fans and two RGB-LED strips which are obviously available separately. As for those who prefer to watercool their hardware on the other hand, a 240 mm radiator can be installed up front.
GPUs may be up to 35 cm long and CPU coolers up to 15 cm in height. Moreover, the I/O panel located at the front also includes a USB 3.0 Type A port in addition to two USB 2.0 ports.
The Features of the Kolink Observatory at a Glance
– Case designed to support motherboards up to
E-ATX
– Front and side panel in 4 mm thick tempered glass
– 4x 120 mm RGB fans including controller and remote
– I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out
– Support for two radiators in 280 mm format
– 2x 3,5″ and 4x 2,5″ data storage devices
– Supports graphics cards up to 38 cm long & CPU coolers up to 16 cm high
– Front and Side Panel in Tempered Glass
– Four Pre-Installed RGB Fans
The robust chassis is made from millimetre thick SECC steel and comes with a front and side panel in four millimetre thick glass. The entire interior is likewise coated in white and equipped with a shroud for the power supply in order to maintain an incredibly clean aesthetic. A hard drive cage is attached here with brackets for two 3,5″ drives as well as space for the power supply. Four more 2,5″ drives can be placed next to the motherboard. The visual highlight of the case is formed by the three 120 mm RGB fans pre-installed in the front and an additional fan in the rear. The fans possess 16 individually addressable RGB-LEDs. Their lighting can be controlled via infrared remote control using the bundled RGB controller and fan hub that can be placed in a location of your choosing. This enables 300 dynamic lighting effects to be configured. Two further 120 mm or 140 mm fans can be mounted in the roof. The three 120 mm fans at the front can be exchanged for two 140 mm fans.
Dust Filters Keep the Kolink Observatory Clean
The motherboard tray and the PSU shroud offer multiple openings for cables. A 240 mm radiator can be installed in the front and on the roof of the Kolink case. With air inlets are equipped with fine dust filters located in the roof and on the bottom of the case. They are easily removed without requiring tools and strengthened with a filigree honeycomb design. GPUs can be up to 38 cm long and CPU coolers may be up to 16 cm high. Additionally the I/O panel located on the front offers two USB 2.0 connections as well as a USB 3.0 Type-A port. A cut-out is present for a USB Type-C connection, however this does not come as standard with the case and must be added later. The same is true of a switch used for controlling the I/O panel’s RGB lighting.
LENOVO ThinkCentre M92z
CORE I 5 3470S QUAD CORE 2.9 GHZ
RAM 8 GB DDR3
SSD 128 GB
GRAFIKA HD 2.2 GB SHARE
MONITOR 20 INCH HD
BLUETOOTH
DVD RW
BOKSE
WIFI
LAN
CAMERA
MAUS TASTJERE WIFI
